FRENZY 2011

SALE...SALE....SALE...FINAL REDUCTIONS OFF!!!!! ALL CURRENT FRENZY'S 2011 KITES WITH BIG SAVINGS

For 2011 everything has been improved. The Frenzy has been through a complete redesign, incorporating new technologies from Ozone’s world leading paraglider designs.

The new Frenzy incorporates a partially closed leading edge with mesh openings for ultimate performance, clean air intake and extra strength. A newly developed diagonal rib configuration helps optimize bridle line layout; this has enabled us to achieve a 28% reduction in line drag and a more direct feel.
An increased number of cells (and reduced cell width) allow more control of the upper and lower surfaces. More cells also help reduce the amount of billowing (ballooning) of the cells, resulting in cleaner surfaces and better overall performance.
The “Link” line is a new addition this year to the Frenzy. This line connects both sides of the Speed System together to maintain the correct distance between both sides of the kite. This “Link” line therefore controls the tension transmitted through the kite which aids stability.
These improvements add to the performance of the kite in all aspects; faster smoother direct handling, more power produced throughout the speed range, better stability and more de-power than ever before.
The Frenzy is constructed from top quality materials and features a double pulley speed-system, utilising the latest high spec Ronstan Orbit Block Series 20 pulleys. We have also added 3 unique “blow out valves” to the under surface to allow the internal volume of air to be released when the kite is crashed into the ground.

For 2011 the Frenzy, Access XT, and Manta M3 all fly with the same bar, the new

Design & Performance Features

• Double Pulley Speed System with new Ronstan Orbit Pulleys
• Direct and responsive handling
• Easy and controllable power
• Mega depower range
• Improved stability
• Improved landing characteristics
• Simple re-launch
• Partially closed cell leading edge for ultimate performance
• Mesh openings for clean air intake and extra strength
• Dirt-Outs in tips
• Diagonal Ribs
• Blow out valves
• Attachment tabs sewn deep into the reinforcement area of the rib
• Mylar edged tips
• 54cm Contact Snow Control System with the original Ozone Y-Line design: 3 x 25m lines from bar splitting to 4 at kite (500 kg and 300kg coloured lines)

• Exceptional hand checked Ozone factory construction using the highest quality materials; Highest grade OzTex 40D and

Edelrid sheathed bridal lines

• Ozone warranty and back-up service guaranteed

QUALITY FEATURES

Mylar Edged Wingtips
The Frenzy has Mylar taped wing tips, giving a more rigid structure and absolutely zero stretching. The Mylar tape effectively locks the wing tip shape, meaning your kite keeps its factory trim.

Double Stitched

The Frenzy is double-needle stitched, which is stronger and more durable than single line stitching in the event of the kite being dragged over rough ground. Even our thread used for stitching the lines and sail is UV-bonded, further adding to the strength and life-span of our kites. Every seam is checked to within 0.5 mm; a look at the colour-scheme accuracy and the inside of the seams of our kites will highlight this fact. Just remember that only a 1mm error on a cell in a kite with 30 cells leads to an overall error of 3cm, this can make a marked difference to a kites handling, performance and safety!

Attachment Tabs
The Frenzy attachment tabs are sewn deep into the reinforcement area of the ribs, which means that the load is spread over a larger area of material, thus reducing any stretching and ageing of the cloth.

Bridle Lines
Our aim when designing the bridle lines is to use the least amount of line possible, minimizing parasitic drag through the air, resulting in a more performant kite. Kite design has advanced to the point where the accuracy and diameter of the line lengths is vitally important. To achieve this accuracy, we use the highest quality Edelrid sheathed lines which are stitch finished for extra strength and less drag.

Flying Lines
300/500kg Dyneema SK75 lines are cut, pre-stretched, sleeved/spliced and stitched to ensure 100% accuracy. The lines are finally load tested to 60% of their breaking strain to “lock” the line and as a final production check. The ‘kook-proof’ colour-coded and labeled line connection system makes set-up safer and completely stress-free for riders new to kiting.

With feedback from our Pro riders and customers we have simplified and refined the new control system.
The stall handle has been re-designed with a reduced diameter and attachment to stop line catching.
The back line trimmers have been replaced with foam floats with internal back line trimming to keep the lower leader lines stiffer to reduce tangles for unhooked riders.

The Contact-Snow Control System still uses our Patent Pending Leash-Less “RE-RIDE” safety system.

Pease Note.

Kites supplied 'complete' 'Ready To Fly'(RTF) Come with......Kite,technical backpack, compression strap, repair kit including instruction manual, control bar and flying lines, safety leash, stickers & key ring.

Kites supplied 'Kite Only' come with..... Kite,technical backpack, compression strap, repair kit, stickers & key ring.

When ordering please select your kite and then add RTF Option for complete package. 

RTF pack can only be purchased in conjunction with kite.

Pricing

We always want to provide the best possible price along with our customer service and years of experience with which we share gladly with our customers.

If you see any of these products cheaper elsewhere and available for immediate delivery then we will be happy to price match.

If you have any questions about our pricing or would like to discuss a package deal  contact us   

Download de power kites manual